Baojin Measurement and Control Technology (Wuhan) Co., Ltd.

 

1.Product images

 

Decoder

 

2.Introduction to Panel Display

 

Decoder Display Panel

PWR: lamp on The power supply is normally

S01： lamp flashes Decoder is running normally

S05： lamp on Receiving indication of communication port 0

S06： lamp on Transmission indication of communication port 0

S07： lamp on Receiving indication of communication port 1

S08： lamp on Transmission indication of communication port 1

A01-A15：lamp on Cyclic binary code indication for address detection

Numerical display The four digits of height are in meters

The lower three digits are in millimeters

 

3. Wiring Instructions

 

24V+ Positive pole of 24V power supply

24V- Negative pole of 24V power supply

R0+ R0-,L0+ L0-,G0+ G0-,…………………………. G13+ G13- Connect the signal line to BJC Ruler.

T(2) R(3) G(5) Sending, receiving and grounding of serial port RS232 communication.

A(8) B(9) Positive and negative of RS485 communication.

 

 

Model：BJW-Sensor Decoder -01V;

Accuracy：2mm;

Data output interface： RS232 OR S485;

Frequency：31k,39k,46K,50K,62K;

Consumption：≦100W;

Supply Voltage： 24V;

Adaptation speed：≤200M/min;

Operation temperature：-10℃～90℃;

 

http://www.displacementssensor.com/